Dialab GmbH
Operator's Manual DIAcheck series Rev-4 Page 54
10. APPENDIX
10.1 BARCODE GUIDELINE
Specification of label:
- Label length: 50 – 70 mm
- Label height: 20 - 30 mm
- Barcode length: 40 – 60 mm
- Barcode height: 10 - 20 mm
- Quiet zone: >5mm
- Resolution/module: 5 -20mils (0.2 – 0.5mm)
- Ratio: min. 1:2,5 to 1:3 (two dimensional codes)
- Quality Level A or B according to ANSI X3.192 -1990
Accepted codes:
- Code 128 3 – 16 characters, use checksum without show
- EAN 128 3 – 13 characters, use checksum without show
- Code 39 4 – 13 characters, no checksum
- Code 93 4 – 13 characters, no checksum
- 2/5 interleaved 8 - 12 characters, no checksum
To Next Page
Loading...
