Dialab GmbH
Operator's Manual DIAcheck series Rev-4 Page 41
3) Transfer ticket code to instrument
Open info screen (touch blinking RED LED) and then “Remaining tests=0”. The code can be
transfered by manual input, barcode scanner or TECAM SMART software.
FIGURE 21: TICKET SYSTEM, INPUT CODE
4) Using TECAM SMART software
FIGURE 22: TICKET SYSTEM, TECAM SMART
a) Use your mobile device and scan QR code or
“Get ticket”, if TECAM is connected to internet
b) Follow dialogue according to chapter (1)
c) Copy Paste the code and “send” to instrument
To Next Page
Loading...