Diamatic BMG-535 - Page 26

MODEL BMG-535 GRINDER
SECTION 3 GENERAL
25
OPERATING MANUAL
APRIL 2009
Grinding & Polishing
The contra pulley gives a reduction of speed to the lower housing. The belt pulley is
driven by a belt from the motor pulley.
Fig. 3.11
1 Axle 6 Taper Lock Bushing 11 Flat Washer, Wide
2 Retaining Ring 7
Key
12 Bearing House
3 Bearing 8 Flange 13 Ring
4 Retaining Ring 9 Belt Pulley 14 Socket Head Cap Screw
5 Pulley 10
HexHeadCapScrew
15 Flat Washer, Narrow
3.12 CONTRA PULLEY