MODEL BMG-535 GRINDER
SECTION 5 INITIAL OPERATION
38
OPERATING MANUAL
APRIL 2009
Grinding & Polishing
• Using the “FWD/REV” selector switch (5) determine the head rotation direction.
• Press the green “START” button (6) to start the machine.
• Now let down the grinding disc on the surface gently and begin the grinding work. Move
the machine slowly forward or reverse to start grinding or polishing. (See chapter 6).
Switching off the grinding machine:
• Push down on the handgrips (4).
• Push the red “STOP” button (7) on the operator control panel.
• In case of emergency, push the red “EMERGENCY STOP” button (8).
To Next Page
Loading...
