DI-5000_DP-5000_DPS-5000 Service Manual Edition 2
71
7.7 Maintenance
7.7.1 Thermal Head Cleaning
To maintain good quality printouts and long life span for the thermal print head, regular cleaning of the thermal
print head is required. Please use the cleaning kit supplied with the product.
Instruction
1. Turn OFF Scale by Main Power Switch.
2. Open the printer door by pulling the printer front cover from bottom hole handle.
3. Use the tip of the cleaning tool to clean the thermal head printing surface (Black part).
CAUTION
Use only the cleaning pen from the provided cleaning kit
Do not clean or try to remove dirt or anything sticking on thermal head with sharp objects – this will
DAMAGE the thermal print head.
CAUTION
There is a cutter at the printer door near the dispenser. Take care not to touch or cut your fingers
against the cutter.
To Next Page
Loading...
Need help?
General
