For more information about SmartSense visit www.smartsense.co or call 1-866-806-2653
© 1996
-
2018 Digi International Inc. All rights reserved. All other trademarks are the property of their respective owners.
P8
A1/818
3. Set Obtain Wan IP Via to Use Static IP and input your network settings then nally click Save Network
Settings.
4. Connect the Internet router to the Internet port on the gateway using an Ethernet cable (not included). You
should see a single blink on both the LAN and Internet indicator lights after a successful transmission.
To Next Page
Loading...
Need help?
General
