Digi XBee Getting Started Guide

©2011DigiInternational,Inc.. 20
XBee Wi‐Fi Development Kit Getting Started Guide
3.Typeatsm1andpresstheEnterkeytoenablethedeepsleepmode.
Note:ATSM1isanATcommandspecifyingsleepmode1.Additionalinformationon
sleepmodeisavailableintheProductManual.
Warning:Thiscommandneedstobeenteredwithina fewsecondsortheXBeeWi‐Fiwill
automaticallyexitcommandmodeandyouwillneedtogobacktoStep2.Thedefault
commandmodetimeoutis10seconds.
Note:Youcanexitthecommandmodebytypingatcnandpressing theEnterkey .

Digi XBee Specifications

General

Operating Frequency	2.4 GHz
RF Data Rate	250 kbps
Model	XBee S2C
Category	Control Unit
Operating Voltage	2.1 to 3.6V DC
Operating Temperature	-40 to +85 °C
Interface	UART
Dimensions	24.38 x 27.61 x 9.14 mm