Operator’s Manual DigiPump LP8 Infusion Pump - Digicare Biomedical Technology Inc.
- 5 -
Power source AC: 100V-240V, 50Hz/60Hz
Battery Rechargeable Ni-Hydrogen battery, DC12V, 2000mAh. (Battery lasts
approximately 4 hours)
Classification Class II, Internal power supply ,Type CF, IPX4
Net weight 2.1 KG
Dimensions 151mm × 150mm × 235mm (5.94” x 5.90” x 9.25”)
Operating Ambient temperature ：+5 °C ～ +40°C ( 41°F ～ 104°F)
Operating Relative humidity ：20%～90%
Operating Atmospheric pressure ：70KPa～106Kpa
1.3 Description
• The DigiPump LP8 is designed for precise infusion of both general parental solution and solution with
high surface tension, offering safety, performance and convenience with its easy-to-set adjustment and
compensation functions.
• Applications include continuous infusion at operating room, ICU, CCU, chemotherapy, TPN, nutrition,
infusion of oxytoxics and anti-cancer drugs.
• It allow the use of general purpose infusion sets. Variations in drop size during the infusion flow as
changed by the infusion flow is automatically corrected by a built-in program in the pump to
administer intravenous fluid over a long period of time without error.
• Standard IV sets (10,15,20,60drops/mL) can be used (we suggest the use of only high quality infusion
set brand).
• The internal battery provides continuous infusion when moving the patient or in case the AC power
loss (battery operation time is 4 hours if flow rate is below 30drops/min or 90ml/h).
• “Empty” function automatically program the volume to be the whole bottle.
• Flow rate selection between “ml/hr” and “drop/min”.
• The linear pump cassette is detachable and can be washed in water.
• The infusion set clamp is detachable and can be easily washed in water.
• Single-handed operation is possible.
To Next Page
Loading...