Mbox 2 Pro Setup Guide28
Disabling System Startup Items
The fewer items in use by your computer, the
more resources are available for Pro Tools. Some
startup applications may be consuming unnec-
essary CPU resources, and can be turned off.
If you disable any of the following startup items,
do so carefully:
• Portable media serial number (required for
some applications that utilize a copy pro-
tection key)
• The Plug and Play service
• Event log
• Cryptographic services
To Disable System Startup Items:
1 From the Start menu, type “msconfig” in Start
Search (Windows Vista) or in Run (Windows XP)
and click OK to open the System Configuration
Utility.
2 Under the General tab, choose Selective Star-
tup.
3 Deselect Load Startup Items and click OK.
4 Click Restart to restart the computer.
5 After restarting, the computer displays a Sys-
tem Configuration message. Check to see if
Pro Tools performance has increased before you
deselect the Don't show this message again op-
tion. If performance has not changed, run
“msconfig” and return your computer Startup
Selection back to Normal Startup - load all device
drives and services. Alternatively, try disabling
Startup items and non-essential processes indi-
vidually.
To Next Page
Loading...
