EasyManua.ls Logo

DigiDesign Mbox 2 Pro - Page 42

DigiDesign Mbox 2 Pro
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mbox 2 Pro Setup Guide34
Aux In (Line and Phono Inputs)
The Aux In section provides two pairs of inputs
for different types of equipment. The Aux In
Line L and R inputs are 1/4-inch, balanced TRS
connectors. The Phono inputs are unbalanced,
coaxial RCA connectors.
Grounding Post
The Grounding Post is for grounding turntables
and other types of DJ equipment to Mbox 2 Pro.
Mic/Line 1 and 2
Each analog source input channel (Input 1 and
Input 2) provides Mic (XLR) and Line (TRS) in-
put on combination jacks. On the front panel,
the input signal is adjusted by the Gain control
for each channel and the source (Mic/Line, or
DI) is chosen using the Source selectors.
Source 2 is at the far left (when looking at the
back panel), and Source 1 is to its right. The back
panel inputs for Source 1 and Source 2 are lo-
cated such that they are directly in line with
their associated input controls on the front
panel. This lets you locate input jacks more eas-
ily when viewing from the front of the unit.

Table of Contents

Other manuals for DigiDesign Mbox 2 Pro

Related product manuals