Camera Connection through Network
The NVR supports three different methods to search and register cameras on the local network (not
directly connected by PoE) to the NVR.
• Auto Configuration: allows the NVR to scan the network and automatically register the first
cameras it finds to the available channels.
• Drag & Drop Configuration: scans the network for supported cameras, displaying the results
in a table from which you can drag cameras to the viewing channel to assign them to channels.
• Advanced Search: settings and manually adding cameras, select SEARCH.
3.2.2.1. Auto Configuration
1. Select a recording mode for the cameras. This recording option will
be applied to all cameras registered to the NVR.
2. Click [START]. The NVR will search all cameras under the same
network (subnet) and automatically register them in the order that
they are discovered.
3.2.2.2. Drag and Drop Configuration
1. Click the [START] button to search for cameras. The NVR will search the network for
cameras and display all results in the table on the right.
2. Select the camera in the list and drag and drop it to the channel you want to assign to the
camera. (While moving, the mouse pointer is changed to .)
3. Click [APPLY] to save all changes.
3.2.2.3. Advanced Search
The Advanced Configuration menu allows you to search for cameras with advanced configuration
options, manage assigned cameras and manually add cameras using individual URLs.
1. Click [SEARCH] to automatically search for all cameras on the network.
To Next Page
Loading...
