2. Select a camera from the list and click [GET STREAM] to read the streams of the camera.
3. When [GET STREAM] is selected, the NVR will assign a channel number to the selected
camera. Users can also select a specific channel number from the drop-down options.
4. [CAMERA INFO] shows the camera’s basic information such as model name, IP address, Port
number, and MAC address in detail.
5. [SETUP] allows users to control the camera’s settings such as
Resolution/Frame/Bitrate/Image Quality etc.
6. Click [APPLY] to register the selected camera to the NVR.
To Next Page
Loading...
