when a sensor is triggered, and motion is detected but neither sensor nor motion detection alarms
will be activated.
In cases where the recording schedule is set by “CONT + MOT” or “MOT + SENS”, the
system records by continuous or motion detection mode in normal operation. However,
when motion occurs in the motion area or an alarm is activated, then the recording mode
will switch to recording as set by “EVENT ALARM” or “SENSOR” of the “ALARM” menu.
The data recorded during DST (Daylight Saving Time) will be indicated in Dark Blue color
in the Intelli-Search Bar in Playback Mode.
HOLIDAY SETUP
Set up specific days as “holidays” in HOLIDAY SETUP to assign a
special recording schedule for those days. The system supports up to
32 holidays.
Press the [DATE] button ( ) write a description, and press [ADD] to
save the data as a holiday.
Instant Recording (Emergency Recording)
In the case of an emergency, the user enables Instant Record by pressing the panic
recording button in the menu bar. The system will instantly start recording all the channels
with the full-frame rate at the maximum resolution regardless of the recording mode setting.
will appear in Live Mode and a red-colored bar is shown in the time search bar for
video recorded by instant recording.
RECORD 1FPS CONTINUOUS WITH ‘CONT+’ MODE.
Check the box to set continuous recording to 1FPS when selecting “continuous + xx” modes.
LIMIT EMERGENCY RECORDING TIME
Set a limit to how long the system will record in emergency recording mode. Select from
30sec/60sec/90sec/2min/5min/10min.
To Next Page
Loading...
