DigiTech BP200 User Manual

Connecting the BP200
The BP200 can be connected in several different ways.The following diagrams show a few possi-
ble options.Before connecting the BP200,make sure the power to your amplifier is turned off.
The BP200 should also be powered off or unplugged.
Mono Operation
1.Connect your bass to the BP200’s Input.
2.Connect a single mono instrument cable from the BP200’s Output to the amplifier’s
instrument input,or a power amp’s line input.
SLApin
Bass Amp Input/Effect Return
Output Input
5
BP200 Manual 9/26/01 3:21 PM Page 5

DigiTech BP200 Specifications

General

Brand	DigiTech
Model	BP200
Category	Computer Hardware
Language	English