Phaser
A phaser splits the incoming signal,and changes the phasing of the signal. The signal
is then taken in and out of phase and mixed back in with the original signal. As the
phasing changes,different frequencies get cancelled resulting in a warm twisting
sound.
Amount - Rotate the GAIN knob to simultaneously adjust the phaser speed and
depth (1-99).
Effect Level - Rotate the MASTER LEVEL knob to adjust the phaser level (1-99).
Envelope Filter
The Envelope Filter is a dynamic Wah effect that alters your sound based upon how
hard you play.
Amount - Rotate the GAIN knob to adjust the amount of input signal (sensitivity)
required to trigger the Envelope effect (1-99).
Effect Level - Rotate the MASTER LEVEL knob to adjust the mix of the
Envelope effect (0-99).
Vibrato
A vibrato effect modulates the pitch of the incoming signal at an even rate.
Amount - Rotate the GAIN knob to adjust the speed at which the pitch modu-
lates (1-99).
Effect Level - Rotate the MASTER LEVEL knob to adjust the depth of the mod-
ulation (0-99).
22
To Next Page
Loading...
Need help?
General
