Rhythm Trainer
The BP200 includes 31 sampled drum patterns that may be used to develop a good sense
of timing. To use the Rhythm Trainer, do the following:
1.Press the RHYTHM button.
2.Rotate the AMP TYPE knob to select 1 of the 30 patterns available.
3.Rotate the GAIN knob to set the pattern tempo (40-240BPM).
4.Rotate the MASTER LEVEL knob to adjust the rhythm playback level (0-99).
5.Press the RHYTHM button again to exit the Rhythm Trainer. All rhythm settings are
maintained until the BP200 is powered off.
Note: Press the SELECT button to return to Edit Mode. Press the STORE
button to return to Store Mode. Press either footswitch to return to
Performance Mode with the Rhythm Trainer playback still enabled.
Expression Pedal
Assigning a Parameter
The BP200 includes a built-in Expression pedal. The Expression pedal is used to con-
trol many of the BP200’s effect parameters in real time. To assign a parameter to the
Expression pedal,do the following:
1.Select a User or Factory Preset.
2.Press the SELECT button until the Matrix’s last effect row LED begins flashing.
3.Rotate the AMP TYPE knob to select the parameter the pedal will control.
14
To Next Page
Loading...
Need help?
General
