Compressor
A Compressor is used to increase sustain,and prevent the signal from clipping the input
of the other effects.The compressor threshold is a fixed setting.
Amount - Rotate the AMP TYPE knob to increase the amount of compression (OFF,
1-99).
Comp Gain - Rotate the GAIN KNOB to increase the compression level (1-6)
Crossover - Rotate the MASTER LEVEL knob to adjust the compressor crossover
frequency. Signals below this frequency are compressed (50Hz,63Hz,80Hz,
100Hz,125Hz, 160Hz,200Hz,250Hz, 315Hz,400Hz,500Hz, 630Hz,800Hz,
1.0KHz,1.25KHz, 1.6KHz,2.0KHz,2.5KHz, 3.15KHz,& Full Range).
Amp/Stompbox Models
Selects the amp to be used for the preset. Choices are as follows:
Rock Amp rock - Model based on an Ampeg SVT
Ash Down ashdwn - Model based on an Ashdown ABM-C410H
Bass Man basman - Model based on a Fender Bassman
Solar 200 solar - Model based on a Sunn 200S
Stellar stella - Model based on a SWR Interstellar Overdrive
British britsh - Model based on a Trace-Elliot Commando
Bomber bomber - Model based on an Ampeg B-15
Hi Wattage hiwatg - Modeled based on an Hiwatt 50
Bogey Man boogmn - Model based on an Mesa/Boogie Bass 400+
18
To Next Page
Loading...
Need help?
General
