DigiTech BP200 - Stereo Operation

Stereo Operation
1.Connect your bass to the BP200’s Input.
2.Connect a TRS stereo “Y” cord to the BP200’s Stereo Output.
3.Connect one end of the “Y” cord to an amplifier,mixer channel,or power amp input.
4.Connect the second end of the “Y” cord to another amplifier,mixer channel,or power
amp output.
SLApin
Instrument Input
Bass Amp Input/Effect Return
TRS Stereo Output
Stereo 'Y'
Cord
6
BP200 Manual 9/26/01 3:21 PM Page 6