Stereo Operation
For stereo operation connect the bass to the Input of the BP50. Connect a TRS stereo “Y”
cord or a pair of stereo headphones to the BP50’s Output. When using a “Y” cord, connect
one end of the “Y” cord to the input of one amplifier or channel of a mixer. Connect the
second end of the “Y” cord to a second amplifier, or second channel of a mixer. If
connecting to a mixing console, set the pan controls of the mixer hard left and right to
retain stereo separation. To emulate a bass cabinet sound when using the BP50 with a
mixer or headphones, you can use Global Cabinet Modeling (see page 20).
To Next Page
Loading...
