2.Value Buttons - The Value Buttons perform various functions depending on which mode is
selected. In Play mode, these buttons control the BP50’s Master Level. In
Edit mode, these buttons adjust the selected effect. These buttons also
change the Pattern,Tempo, and Level of the Drum machine when it is turned
on. When the Tuner is on, these buttons select the tuning reference.
3. Edit/Effect Buttons - Pressing either of the Edit buttons enters Edit mode and selects the
individual effects to be edited. Press the left and right Edit buttons to
move through the effects. The effect LEDs light to identify which
effect you are editing
4. Drums - The Drums button is used to turn the BP50’s drum machine on and off . When the
Drums feature is on, the Drums LED lights and the selected drum pattern plays
continuously.
5. Effect LEDs - The Effect LEDs provide information regarding the current preset. In Edit
mode, the LEDs identify the effect selected for editing. In Tuner mode, the
LEDs indicate whether the note played is sharp, flat, or in tune.
6. Display - The Display provides information for different functions depending on the selected
mode. In Play mode, the display shows the selected preset number. . In Edit mode,
the display shows the value of the parameter being adjusted. When the Tuner is
selected, the display shows the note played.
7. Store - The Store button saves your custom changes to the user presets.
3
To Next Page
Loading...
Need help?
General
