Cabinet Modeling is now enabled for all amp models in all presets. The following lists what
cabinet accompanies each model:
Factory Reset
This function resets the BP50 to its original factory settings.This procedure erases all
custom user presets. Performing this function erases all user-programmed data.
All such data will be lost forever!
The procedure for performing a Factory Reset is as follows:
1. Disconnect the power supply from the BP50 (AC Power) or unplug the bass guitar from
the input jack (battery power).
2. Press and hold the left EDIT button while re-connecting the power or plugging your bass
guitar into the BP50’s input.
3.When the display reads --, release the button and press the STORE button. The display
reads rE. The BP50 is now restored to its factory settings.
r1-r9 – 8x10 Cabinet
a1-A9 – 4x10H Cabinet
b1-b9 – 4x10 Cabinet
S1-S9 – 2x15 Cabinet
O1-O9 – 4x10H Cabinet
t1-t9 – 2x15 Cabinet
o1-o9 – 1x15 Cabinet
H1-H9 – 4x10 Cabinet
Y1-Y9 – 2x15 Cabinet
d1-d9 – 2x15 Cabinet
c1-c9 – 4x10H Cabinet
F1-f9 – 2x15 Cabinet
g1-g9 – 2x15 Cabinet
P1-P9 – 2x15 Cabinet
L1-L9 – 2x15 Cabinet
n1-n9 – 2x15 Cabinet
21
To Next Page
Loading...
Need help?
General
