Phaser (P1-p9)
A phaser splits the incoming signal, and changes the phasing of the signal. The signal is
taken in and out of phase and mixed back in with the original signal. As the phasing
changes, different frequencies get canceled resulting in a warm sort of twisting sound.
Use the Value buttons to select one of the nine Phaser settings.
Vibrato (b1-b9)
A Vibrato effect modulates the pitch of the incoming signal at an even rate. Use the
Value buttons to select one of the nine Vibrato settings.
SynthTalk™ (S1-S9)
SynthTalk uses formant style filtering that produces vocal and vowel sounds. This gives
the illusion of a synthesized talking bass.
Octavider (O1-O9)
The Octavider effect creates a smooth tracking unison note one octave below the note
being played.
Envelope Filter (E1-e9)
The Envelope Filter is a dynamic Wah effect that alters your sound based upon how
hard you play. Use the Value buttons to select one of the nine Envelope Filter settings.
Detune (d1-d9)
A Detuner makes a copy of your incoming signal, takes the copied signal slightly out of
17
To Next Page
Loading...
Need help?
General
