The Expression Factory
TM
outputs can be configured in one of four Out-
put Modes:
1. Mono Mode – Outputs a mono signal through either the OUT 1 (AMP)
jack or the OUT 2 (MIXER) jack.
2. Stereo Mixer Mode – Outputs a stereo signal through both the OUT 1
(AMP) and OUT 2 (MIXER) jacks, suitable for connecting to a mixer or
recording device.
3. Stereo Amp Mode – Outputs a stereo signal through both the OUT 1
(AMP) and OUT 2 (MIXER) jacks, suitable for connecting to an ampli-
fier.
4. Amp + Mixer Mode – Outputs a mono signal through the OUT 1
(AMP) jack suitable for connecting to an amplifier, and also outputs a
mono signal through the OUT 2 (MIXER) jack, suitable for connecting
to a mixer or recording device.
When the Expression Factory is shipped from the factory, the default
modes are Mono Mode and Stereo Mixer Mode. Refer to the Flexible
Output Mode
TM
Setup section of this manual for more information.
To Next Page
Loading...
Need help?
General
