1. OUT 1 (AMP)*
Connect this output jack to your
guitar amplifier. Refer to the Flex-
ible Output Mode
TM
Setup sec-
tion for more information.
2. OUT 2 (MIXER)*
This output has been specifically
tailored for use with a full range
audio system and is designed to be
plugged directly into a mixer or
recording device for optimal per-
formance. Refer to the Flexible
Output Mode Setup section for
more information.
3. (Tip) - CONTROL 1
Model dependent. Refer to the Ef-
fect Model Control table for more
information.
(Ring) - DIST LEVEL
Controls distortion level.
* Use only unbalanced TS instrument cables.
To Next Page
Loading...
