© 2019 Digitrax, Inc. www.digitrax.com
2
1.0 Introduction
Congratulations on your purchase of a Zephyr Express Digitrax Complete Train
Control Starter Set!
The design of the Digitrax Complete Train Control
®
system lets you operate
your layout the way you choose. With LocoNet
®
you simply connect system
components to build the layout control system that you’ve always wanted!
The Digitrax system reduces and simplifies layout wiring.
Your Zephyr Express Starter Set has several components:
• DCS52 All-In-one command station, booster and throttle to run your lay-
out. This unit does everything you need to get up and running in one unit.
• PS314 Power Supply to provide power to run your DCS52. The DCS52
should only be powered by a PS314.
• LT1 LocoNet Cable and Decoder Tester for testing LocoNet Cables and
decoders prior to installation
• Quick Start Guide – To get you up and running fast!
• Zephyr Express Manual – System Reference Manual
• Digitrax Decoder Manual – Reference for Digitrax Decoders
There are many dierent combinations of Digitrax components that can be used
to set up a layout control system that is right for you. You can combine Digitrax
products with compatible decoders, boosters and computer software made by
other companies that build compatible equipment.
Your success with & enjoyment of our products are very important to us. After
all, this is a hobby and it is FUN!!! Please read this manual carefully before
installing your system. We have included lots of hints and operating ideas based
on our experience. If you have questions not covered by this manual please
contact your dealer or visit our web site at www.digitrax.com. The Digitrax
on-line Tech Support Depot is always open, and support sta is ready to help
on our Help Desk at: helpdesk.digitrax.com.
To Next Page
Loading...
