Digitrax Zephyr Express DCS52 - 2.0 Quick Start Guide; 2.1 Unpacking Your Zephyr Express; 2.2 Before You Begin

© 2019 Digitrax, Inc. www.digitrax.com
5
5
2.0 Quick Start Guide
These instructions will get you up and running in just a few minutes! A full
description of all controls and technical reference information are included later
in this manual.
2.1 Unpacking Your Zephyr Express
Unpack your box and locate the DCS52 Command Station and the PS314
Power Supply. The LT1 can be set aside.
Power Cord
PS314
DC Plug
LT1 Decoder and LocoNet® Cable
Tester
DCS52
Command Station
Zephyr Express Unpacking
2.2 Before You Begin
Before you begin ensure that the Throttle Knob is turned all they way to
STOP and the Direction/Brake Lever is set to BRAKE