Dimension One Spas Executive - Water Care

Page 31
Reflections Collection
12.1 Water Care
Your D1 hot tub is equipped with 5 programmable modes, Figure 12.1a.
Each of the modes are described below.
Note: Economy mode will not allow the heater to turn on until the water
temperature reaches 20°F (11°C) below the set temperature; unless
programmed otherwise.
Away from home
= Away from home: In this economy mode, the heater
will not turn on until the water temperature reaches
20°F (11°C) below the set temperature.
Standard-Beginner
= Standard-Beginner: In this standard mode, the heater
can heat to maintain the set temperature.
Energy saving
= Energy saving: In this economy mode, during the peak
hours from Monday to Friday, the heater will not turn on
until the water temperature reaches 20°F (11°C) below
the set temperature. On the weekend, the temperature
will be maintained as programmed.
Super energy
= Super energy: In this economy mode, every day during
the peak hours, the heater will not turn on until the
water temperature reaches 20°F (11°C) below the set
temperature.
Weekender
= Weekender: In this economy mode, from Monday
to Friday, the heater will not turn on until the water
temperature reaches 20°F (11°C) below the set
temperature. On the weekend, the temperature will be
maintained as programmed.
= Water Care button: Multi-purpose button. It can be used to
select an option, to go back to the previous menu, and to exit
and return to the settings menu.
= Pencil Icon: This icon will appear next to the water care mode
that has been programmed. Tap to enter that mode to make
changes, Figure 12.1b.
= Trash Can Icon: This icon will appear next to an economy or
ltercyclethathasbeenprogrammed.Taptodeletethat
cycle.
Settings
Water Care
8:01 am
Settings
Water Care
Maintenance
8:01 am
Keypad
Electrical Config
Date & Time
Settings
Away from home
Standard-Beginner
Super energy
Weekender
Energy saving
Figure 12.1a
Figure 12.1b