Why does my Dimplex DF3003 keep tripping the circuit breaker?
If the circuit breaker trips or a fuse blows when you turn on your Dimplex Indoor Fireplace, it could be due to a short in the unit's wiring, in which case you should trace the wiring. Alternatively, additional appliances might be exceeding the current rating of the circuit breaker or fuse. Try plugging the unit into another outlet or installing it on a dedicated 15 amp circuit.
Dimplex DF3003 Indoor Fireplace: heater fan on, but no heat?
If the heater fan on your Dimplex Indoor Fireplace turns on but doesn't produce heat, first, refer to the Operation Section for proper operation. Check for loose wiring in the unit. It could also be a defective Heater Assembly, which would need to be replaced.
Why do lights dim when Dimplex DF3003 Indoor Fireplace is on?
If the lights dim in the room when your Dimplex Indoor Fireplace is on, the unit might be drawing close to the circuit's current rating. Try moving the unit to another outlet or installing it on a dedicated 15 amp circuit.
Why does my Dimplex DF3003 Indoor Fireplace heater emit an odor?
If your Dimplex Indoor Fireplace heater emits an odor, it may be normal if it's a brief period after the heater is initially turned on, as it burns off dust accumulated during manufacturing or operation. However, a defective Heater Assembly could also be the cause, requiring replacement.
What to do if Dimplex DF3003 Indoor Fireplace does not turn on manually?
If your Dimplex Indoor Fireplace isn't turning on manually, first, refer to the Operation Section for proper operation. Check the Fuse/Breaker Panel to ensure there's incoming power from the electrical wall socket. Also, inspect wiring connections for any looseness. A defective switch (3-Position or On/Off) or a defective Remote Control Receiver could also be the problem, requiring replacement.
Why does my Dimplex DF3003 Indoor Fireplace heater turn off after a few minutes?
If the heater on your Dimplex Indoor Fireplace turns off after a few minutes, it could be due to a buildup of dirt or dust in the heater assembly. Ensure the exterior intake louvers and firebox cavity are free of dirt and dust. Alternatively, the Heater Assembly may be defective and require replacement.
How to fix Dimplex Indoor Fireplace heater if it's not turning on?
If the heater on your Dimplex Indoor Fireplace isn't turning on, but the flame effect works, first, refer to the Operation Section for proper operation. Second, check for loose wiring in the unit. It could also be a defective Heater On/Off switch, which would need replacement. Lastly, a defective Heater assembly could be the cause, requiring replacement.
Why does my Dimplex Indoor Fireplace turn on and off by itself?
If your Dimplex Indoor Fireplace turns on or off by itself, the remote control might have a similar frequency to others nearby. Try changing the frequency of the Remote Control, referring to the Operation Section. Radio frequency disturbance from outside sources could also be the cause, so again, change the remote control frequency. If issues continue, replace the Remote Control and Receiver, and initialize them. A defective Remote Control Receiver could also be the culprit, so replace it and initialize it with the Remote Control.
What to do if Dimplex DF3003 Indoor Fireplace does not turn on using the remote control?
If your Dimplex Indoor Fireplace isn't turning on with the remote control, ensure the remote is initialized to the fireplace. If not, initialize the remote control. Also, the remote control might not be working correctly, so install a new battery and reinitialize if needed. If problems persist, consider replacing the Remote Control or Remote Control Receiver and then initialize them.
Step-by-step instructions for installing the fireplace into an existing fireplace structure.
Guidance on preparing a new wall opening and framing for fireplace installation.
Instructions for installing the fireplace with a mantel surround kit or custom-built surround.
Explanation of the manual controls on the fireplace unit, including ON/OFF, dimmer, and action controls.
Procedure for replacing the internal light bulbs that create the flame and ember effects.
Specifies the Dimplex fireplace models and trims covered by the limited warranty.
Lists items and conditions not covered by the manufacturer's limited warranty.
Details the duration and scope of coverage for parts and labor under the warranty.
General| Model | DF3003 |
|---|---|
| Type | Electric Fireplace |
| Fuel Type | Electric |
| Voltage | 120 V |
| Power Consumption | 1500 W |
| Heating Area | 400 sq. ft. |
| Adjustable Thermostat | Yes |
| Remote Control | Yes |
To Next Page
