Dimplex WPM EconPlus - Page 63

EN-19
Configuring the Heat Pump Heating System 6.1
English


Should the auxiliary pump operate during
cooling operation?
No
Yes
Active or passive
cooling


Should the auxiliary pump operate during
domestic hot water preparation?
No
Yes
Domestic hot water


Should the auxiliary pump operate during
swimming pool water preparation?
No
Yes
Swimming pool


Should the auxiliary pump be running during
the request from the 2nd heat generator?
No
Yes
Bivalent


Is it desirable that the heat circulating pump
switches on and off as required? If optimisation
is switched off (NO), the heat circulating pump
is run in continuous operation.
Yes
No
Heating circuit 1


Setting the lead times of the pumps before the
compressor starts.
10s
... 60s ...
420s
Always


Sets the delay time for the secondary pumps. 0s
... 5s ...
420s
Always


Should pump M13 be running during the
passive cooling function?
No
Yes
Cooling function
passiv


Should pump M11 be running during the
passive cooling function?
No
Yes
Cooling function
passiv



Sets the date, year, day, month and weekday Always

The language for menu navigation can be
selected from the available languages
DEUTSCH
ENGLISH
FRANCAIS
ITALIANO
NEDERLAND
PORTUGUES
POLSKY
SVENSKA
SLOVENSKO
ESPANOL
CESKY
SUOMI
NORSK
DANSK
CHINESE
Always

System-specific parameters Setting range Display