Dimplex WPM EconPlus - Outputs; Inputs

EN-20
6.2
English
6.2 Outputs
Depending on the system configuration, the “Outputs” menu
displays the “OFF or ON” status display for the following outputs:
6.3 Inputs
Depending on the system configuration, the “Inputs” menu
shows the “Contact open or closed” status display for the
following digital inputs:

Display

Always

2 compressors

Cooling function
Air-to-water HP


Always


Passive cooling function

Bivalent or mono energy


Bivalent


Bivalent


Heating circuit 3


Heating circuit 3


bivalent-regenerativ


bivalent-regenerativ

Always


Cooling function


Heating circuit 2


Heating circuit 2 or
silent cooling Heating circuit 1/2


Heating circuit 2 or
silent cooling Heating circuit 1/2

Always

Passive cooling function


Cooling function


Passive cooling function

Hot water

Hot water
Sensor
Flange heater

Swimming pool

Circulation

Display

Status display of all digital inputs

“Contact open” means that a fault has occurred (setting LP
pressure switch NC contact
1
Always

“Contact open” means that a fault has occurred (setting HP
pressure switch NC contact)
1
Always

“Contact closed” denotes defrost end Air HP without hot
gas defrosting
Pressure sensors
No


“Contact open” means that a fault has occurred (insufficient flow
rate)
Flow rate switch
Primary circuit


“Contact open” means that a fault has occurred (insufficient flow
rate)
Flow rate switch
Secondary circuit

“Contact open” means that a fault has occurred. Air HP


“Contact open” means that a fault has occurred. BW or WW HP


“Contact open” means that a fault has occurred. Always


“Contact open” means that a fault has occurred. Always