DNDS Modular Original Betriebsanleitung Original Instruction Manual
Die Frequenzwerte in den unteren Tabellen sind
Tabellenwert = Messsystem Frequenz Teiler an S1, S2
The frequency values in the tables below are:
Table values = system frequency divisor at S1, S2
Frequenzauswahl für Vmax bei V7
Selection of frequency for Vmax using V7
Auswahl von Vmax im Einricht- und Halbautomatikbetrieb
Selection of Vmax during the tool setting and semi-automatic function mode
Frequenzauswahl für Vmax bei V7A und V7C
Selection of frequency for Vmax using V7A and V7C
Auswahl von Vmax im Einricht- und Halbautomatikbetrieb
Auswahl von Vmax im Automatikbetrieb
Selection of Vmax for tool setting and semi-automatic mode
Selection of Vmax during automatic mode