MAINTENANCE SCHEDULE
Read and understand all the warnings and
instructions before starting any maintenance
operation.
Before carrying out any maintenance
operation, make sure all the scheduled actions
have been carried out as planned.
A Every 10 hours of operation or daily
A-1 Visual inspection - checking
A-2 Telescopic boom sliding blocks - check
A-3 Auxiliary pump - operating test
A-4 Overload sensor - check
B Every 50 hours of operation or
every 2 weeks
B-1 Transmission shaft - lubrication of
universal joints
B-2 Axles - lubrication of oscillation bushes
B-3 Hydraulic oil level - check
B-4 Telescopic boom sliding blocks -
lubrication
B-5 Turret rotation slewing ring gear -
lubrication
B-6 Wheels - check tightening of nuts
B-7 Steering elements - lubrication
C Every 250 hours of operation or
every 3 months
C-1 Differentials oil - check
C-2 Wheel reduction gears oil - check
C-3 Turret rotation slewing ring gear -
check reduction gear oil level
C-4 Dropbox oil - check
D Every 500 hours of operation or
every 6 months
D-1 Hydraulic oil filter - replacement
D-2 Turret rotation slewing ring gear -
check tightening of bolts
E Every 1000 hours of operation or
every year
E-1 Differentials oil - change
E-2 Wheel reduction gears oil - change
E-3 Telescopic boom sliding blocks - adjust
the play
E-4 Turret rotation slewing ring gear -
change reduction gear oil - check play
E-5 Overload sensor – calibration
E-6 Dropbox oil - change
F Every 1500 hours of operation
F-1 Hydraulic fluid - change
To Next Page
Loading...
