A-1 Visual inspection
To ensure the maximum useful operating life
of the vehicle, proceed with a thorough visual
inspection before every starting up.
1 Look around and under the vehicle,
checking to make sure there are no slack
or missing bolts, no accumulated dirt,
leakage of oil and other liquids, broken or
worn parts.
2 Check the state of the accessories and
hydraulic components.
3 Check the state and wear of the tyres. If
necessary
4 Check the lubricate oil and other fluid
levels.
5 Remove all accumulated dirt and debris.
Carry out all the repairs necessary before
starting up the vehicle.
A-2 Telescopic boom sliding
blocks - check
1 Extend the telescopic boom completely.
2 Check to make sure the boom movement
is smooth. Ensure that there are no
abnormal vibrations, unusual noises, and
no part of the boom gets heated due to
friction during the movement.
3 Remove the dust guard gaskets at the
head of the extensions and check to
ensure there is a sufficient layer of grease
on the sliding surfaces and on the sliding
blocks.
To Next Page
Loading...
