√ Before using the machine, it is necessary to
understand and apply the fundamental
principles regarding the working of the
machine in the safety conditions contained
in this Operator's Manual.
1 Avoid hazard situations.
2 Always carry out the pre-operative
inspection.
3 Check the work area.
4 Always carry out functional test
before using the machine.
Read and understand the functional test
before proceeding with the next section.
5 Use the machine only for the purposes
for which it is designed: operating
instructions.
Fundamental elements of
functional test
Functional test makes it possible for the
operator to make sure the machine is in safety
conditions, before using the machine to work.
All the function operation must be done before
starting work by the functional test operating
procedures.
Never use a faulty machine. If faults are found,
the machine must be marked and put out of
service. The repairs must be done only by
qualified technical personnel, according to the
manufacturer's technical specifications.
After completing the repairs, the operator must
repeat the pre-operative inspection and test
the functions before using the machine.
To Next Page
Loading...
