Setting the machines in safety correctly and
choosing appropriate transport means
according to the provisions of the Ministry of
Industry and Public Transport, the regulatory
standards in force and the corporate policies
are solely the responsibility of the owner of the
machine.
DingLi provides the following information
regarding the handling and transport of the
machine only as recommendation.
Loading and unloading the machine from
a transport vehicle must be done solely by
operators skilled in lifting operations.
Make sure the load capacity of the vehicle,
the loading surface, the chains or blocking
devices are capable of supporting the
machine weight. For the machine weight,
refer to the technical data shown on the ID
plate of the machine model.
Make sure the rotation block of the
slewing ring gear positioned on the RH
side of the turret is activated and turret is
locked before proceeding with transport.
Release the slewing ring gear before
restoring the working of the machine.
Check for the presence of any mobile
objects on the platform and remove these
if necessary.
Blocking the chassis
Use all four fixing devices provided on the
chassis according to the diagram shown
above.
Blocking the platform
Fold the platform using the transport mode
that can be selected from the control panel on
the truck: this option eliminates the operating
constraints of the machine, making it possible
to fold the telescopic boom back.
If the boom cannot be folded, make sure the
primary and secondary parts are completely
retracted and that none of the parts touch the
loading surface; place the platform on the
loading deck and secure it in place on the
transport bed using nylon belts.
To Next Page
Loading...
