√ Before using the machine, it is necessary to
understand and apply the fundamental
operating principles of the machine in the
safety conditions contained in this Operator
Manual.
1 Avoid hazard situations.
2 Always carry out the pre-operative
inspection.
3 Check the work area.
4 Always carry out functional test before
using the machine.
5 Use the machine only for the
purposes for which it is designed:
operating instructions.
Fundamental elements of
operating instructions
The machine described in this Manual is
designed to lift persons, tools and equipment
within the maximum capacity allowed by the
platform to the working positions, only for
working from the platform. Access to the
platform is allowed only from the ground
through the entrance gate.
Any method or condition of use outside the
limits of use described or not envisaged by the
Manufacturer is strictly forbidden.
Only trained and authorized personnel should
be permitted to operate a machine. If more
than one operator is expected to use a
machine at different times in the same work
shift, they must all be qualified operators and
are all expected to follow all safety rules and
instructions in the operator's manual. That
means every new operator should perform a
pre-operation inspection, function tests, and a
workplace inspection before using the
machine.
To Next Page
Loading...
