3. ROUTINE MAINTENANCE DURING OPERATION
This chapter describes the service and maintenance operations that the operator of the
platform is responsible for.
Othermaintenanceoperationsrequirespecialtraining,toolsandmaterialsorspecic
measurements and adjustment values. They are separately described in maintenance
instructions manual. Please contact your maintenance partner, dealer or manufacturer.
Make sure that all service and maintenance prochedures are performed in time and
according to instructions.
Any faults which may affect the operational safety of the unit must be repaired before the lift
is used for the next time
Keep the lift clean. Clean the lift carefully before any service and maintenance operations or
inspections. Impurities may cause serious problems in for example in the hydraulic system.
Use original spare parts and service kits. See spare part list for detailed information on spare
parts.
The rst service after 20 hours of operation
• changethepressure-andreturnlterelements
If the lift is operated under demanding conditions (in exceptionally humid or dusty
environment, corrosive climate, etc.), the intervals between the oil changes and the
other inspections shall be shortened to meet the prevailing conditions in order to
maintain the operational safety and reliability of the lift.
The performance of the periodic servicing and the inspections is absolutely
mandatory, because their negligence may impair the operational safety of the lift.
The guarantee will not remain valid, if the servicing and the periodic inspections are
not performed.
To Next Page
Loading...
