Dinolift 205RXT - Inspection of Hydraulic Hoses, Pipes and Connections

29
DINO RXT
DANGER
WARNING
CAUTION
NOTICE
Protect your skin against the hydraulic oil. Used oils can be harmful to the skin.
Tochangeoilandlters:
1. drain the oil tank through the draining plug opening, with all cylinders in retracted position
2. clean and rinse the oil tank with suitable agent
3. replacethepressureandreturnlters
1. install the drain plug
2. rellthetankwithfreshoil,theoilvolumerequiredforchangeisabout50liters
• informationonfactoryllingoilismarkedinthelabelontheoiltank.
• The viscosity class of the hydraulic oil must be ISO VG 32 and the oil must meet the
requirementsaccordingtoDIN51524-HLP.
3. if required, top up hydraulic oil to the upper level marking of the level eye while the lift is
in the transport position
Kyltin numero 30002A
Kyltinkoko(mm) 37x63R5
Pohjan väri valkoinen
Tekstin(kuvion)väri musta
Tekstin korkeus 3,5 mm
Materiaali tarramuovi
Kiinnitystapa oma liima
Kiinnitysalusta maalattu teräslevy
Käyttöpaikka DINO 180XT, DINO 210XT, DINO 260XT
Lisätietoja
DANGER
WARNING
CAUTION
NOTICE
Do not mix different oils types.
4.3.10. Inspection of hydraulic hoses, pipes and connections
• Checkthehosesforleaksandchang
• Checkthattherearenodents,leaks,traceofcorrosionorchangattheclamps
• Check that the pipes are properly fastened
• Check the hose and pipe connections for leaks
Replace any externally damaged hoses or clashed pipes.