Dinolift 205RXT - Page 24

24
DINO RXT
1
Service instructions
1. Disconnect and clean the valve
2. ChecktheO-ringsandreplace,
if necessary
3. Put the valves carefully in place
4. Replace the valve, if necessary
5. Do not change the settings of the valves
DANGER
WARNING
CAUTION
NOTICE
Support the platform, boom system, articulated arm and outriggers in a position, where the
load does not rest on the structure under repair. Make sure to relieve the residual pressure
from the cylinders.
DANGER
WARNING
CAUTION
NOTICE
Thevalvecanonlybeopened2-3timesbeforeit
has to be replaced. Otherwise it may start to leak.