Dinstar MTG1000 - 1.4 FUNCTIONS AND FEATURES; 2.3 CABLING OF E1;T1 PORT

MTG1000 Trunk Gateway User Manual | Dinstar
3
Off
The network is not connected to network or the connection
is improper. 0 refers to GE0 while 1 refers to GE1.
Speed
Off
Network bandwidth is not up to 100Mbps/1000Mbps.
Yellow
Network bandwidth is up to 100Mbps/1000Mbps.
CONSOLE
RJ45, RS232, 115200bps, it is used to carry out maintenance-related
configurations.
RST
Reset button (it is used to reset the gateway)
1.4 Functions and Features
➢ Key Features
⚫ Provide various services such as VoIP, FoIP, Modem and POS
⚫ Support flexible dialing rules and operations, allowing users to customize dialing
rules according to different working environments
⚫ Support multiple coding standards: G.711A/U, G.723.1, G.729A/B and iLBC
⚫ High compatibility, interoperable with PBX of Avaya, NEC and Alcatel, and also
leading soft-switch of Huawei, Cisco and ZTE etc.
➢ Physical Interfaces
⚫ E1/T1 Ports: 1/2 E1/T1
⚫ Interface Type
RJ48(Impedance 120Ω）
⚫ Ethernet Interface
GE1: 10/100/1000 Base-T Adaptive Ethernet
GE0: 10/100/1000 Base-SNMP
T Adaptive Ethernet r
⚫ Serial Port : 1* RS232, 115200bps
➢ Protocols Supported
⚫ SIP v2.0 (UDP/TCP), RFC3261, SDP, RTP(RFC2833), RFC3262, RFC3263,
RFC3264, RFC3265, RFC3515, RFC2976, RFC3311
⚫ SIP TLS/SRTP
⚫ PRI/SS7/R2 Protocol
⚫ RTP/RTCP, RFC2198, RFC1889
⚫ SIP-T, RFC3372, RFC3204, RFC3398