To Next PageTo Next Page
Need help?Do you have a question about the Dinstar UC2000-VG and is the answer not in the manual?
Outlines the key functions, features, and supported protocols of the UC2000-VE/F/G.
Provides crucial precautions and considerations before installing the UC2000-VE/F/G.
Step-by-step guide for physically installing the UC2000-VE/F/G device.
Explains how to connect the UC2000-VE/F/G to a network and PC.
Covers fundamental operational tasks like checking IP and restoring settings.
Guide to accessing and maintaining the device via its RS232 console port.
Instructions for accessing the UC2000-VE's web interface using a browser.
Explains the navigation and configuration interfaces of the UC2000-VE web GUI.
Details how to view system status, mobile information, and SIP information.
Displays connection status, IMSI, signal quality, and call statistics for mobile modules.
Shows registration status and details for SIP channels with the Softswitch or SIP Server.
Covers network statistics like TCP/UDP, RTP, and call history.
Covers network settings including local network, ARP, and VPN.
Configuration options for the device's IP address, subnet mask, and DNS.
Manages security settings including access rules and password control.
Allows setting rules to accept or reject traffic based on port, login, or package types.
Covers settings related to the GSM/CDMA modules, including SIM, band, and IMEI.
Configures basic mobile settings like SIM mode and API.
Detailed configuration options for mobile modules: CLIR, gain, network mode, band type.
Manages SMS and USSD functionalities, including sending, receiving, and limits.
Covers SIP server and trunk configuration, port settings, and routing rules.
Details how to configure the SIP server and outbound proxy settings.
Configures remote IP addresses and ports for SIP trunks.
Configures individual port settings like gain, user ID, and hotlines.
Configures routing rules for calls from IP to Tel (GSM/PSTN).
Configures routing rules for calls from Tel (GSM/PSTN) to IP.
Sets dialing mode parameters like hotline, auto routing, and delay settings.
Enables automatic balance checks for SIM cards and blocking when low.
Configures alerts and actions for events like low ASR, low ACD, or GSM errors.
Enables network traffic capture for diagnostic purposes.
Performs loopback tests on voice streams for DSP and IP modules.
Resets all device parameters to their factory default settings.
Guides on logging into UC2000 via Telnet and understanding basic commands.
General
