To Next PageTo Next Page
Need help?Do you have a question about the Dinstar FXSFXO and is the answer not in the manual?
General| FXS Ports | Up to 32 |
|---|---|
| FXO Ports | Up to 32 |
| Network Interface | Ethernet |
| Ethernet Ports | 2 |
| Protocols | SIP |
| Voice Codecs | G.711, G.729, G.723 |
| Fax Support | T.38 |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% non-condensing |
Provides an overview of the DAG series FXS/FXO hybrid analog voice gateway.
Shows the physical appearance of DAG1000-4S4O and DAG2000-8S8O models.
Details the power supply requirements and parameters for DAG1000-4S40 and DAG2000-8S80.
Illustrates typical network configurations and usage scenarios for the voice gateway.
Lists the key functionalities and technical features of the DAG series voice gateway.
Explains how to make phone calls using the gateway's FXS ports.
Explains the procedure for placing a call on hold.
Describes how the call waiting feature functions.
Outlines the methods for transferring calls.
Lists various call features and their operation codes.
Guides on how to check the LAN and WAN IP addresses using an analog phone.
Details the steps for restoring the device to its factory default settings.
Explains how to set the IP address for the device's LAN port.
Instructions for accessing the device's web interface.
Explains the structure of the web interface's navigation menu.
Introduces sections for viewing device status and performance data.
Guides users through basic device configuration steps.
Covers various network settings for the gateway.
Covers the configuration of the SIP server settings.
Details the configuration parameters for individual ports.
Covers advanced device settings and parameters.
Introduces call and routing configuration options.
Covers number manipulation settings for calls.
Covers general maintenance tasks for the device.
