Dinstar FXSFXO - Basic Operations; Phone Call

DAG1000/2000 Series FXS/FXO Voice Gateway User Manual
4
Dinstar Technologies Co., Ltd.
• Direct IP Call
• Primary and secondary SIP account
• 32 inbound/outbound routing
• Number manipulation
• Dial plan set
• Life line
2. Basic Operations
2.1 Phone Call
2.1.1 Phone or Extension Number
1）Dial the number directly and wait for 3 seconds (Default “ No dial timeout ”);
2）Dial the number directly and press #.
2.1.2 Direct IP Calls
DAG series device with FXS port allow two parties directly call through IP address. The user
need only a simulation with the FXS port unit equipment linked together and set up calls
not registered.
Elements necessary to completing a direct IP call：
1) Both DAG serial and other VoIP Device, have public IP addresses;
2) Both DAG serial and other VoIP Device are on the same LAN using private IP
addresses;
3) Both DAG serial and other VoIP Device can be connected through a router using public
or private IP addresses (with necessary port forwarding or DMZ).
Operation Process：
1）Pick up the analog phone then dial “*47”
2）Enter the target IP address.
【Note】：No dial tone will be played between step 1 and step 2
Examples: