To Next PageTo Next Page
Need help?Do you have a question about the Dinstar FXS and is the answer not in the manual?
General| Voice Codec | G.711 (A-law & μ-law), G.729, G.723, iLBC |
|---|---|
| Fax | T.38 |
| Power Supply | DC 12V/1A |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% (non-condensing) |
| Management | Web |
| FXS Ports | 4 or 16 |
| Protocols | HTTP/HTTPS Web management TFTP/HTTP/HTTPS for Auto Provisioning |
General greeting and introduction to the DINSTAR FXS VoIP Gateway.
Details the scope and content covered in the user manual.
Identifies the target users and their roles for this manual.
Provides a general overview of the FXS VoIP gateway's capabilities.
Visual representation of the gateway hardware.
Detailed description of all physical ports on the device.
Instructions for making standard phone calls.
Procedure for establishing direct IP-to-IP communication.
Covers Call Hold, Call Waiting, and Call Transfer functions.
Steps to set up and manage three-way conference calls.
Configuration and operation for fax transmission.
Initial access and network connection steps for web interface.
Understanding the web UI structure and viewing system information.
Configuring IP, LAN/WAN modes, VLANs, and DHCP.
DMZ, Forward Rules, Static Routes, ARP, and MAC Cloning.
Setting up SIP server details and FXS port parameters.
Detailed FXS/FXO, Media, SIP, Digit Map, Feature Codes.
Defining call routing logic, port groups, and IP trunks.
IP-Tel, Tel-IP routing, and number manipulation settings.
Practical examples for setting up various call routing rules.
Configuring TR069, SNMP, Syslog for remote management.
Configuring WEB and Telnet Access Control Lists (ACL).
Firmware updates, data backup/restore, and network tests.
Enabling and performing network traffic capture.
Procedures for factory reset and device restart.
Definitions of key technical terms used in the manual.
