Chapter1: Introduction
Welcome
Thanks for choosing DINSTAR FXS VoIP Gateway (hereafter named “GATEWAY”, “DEVICE”)!
We hope you will make optimum use of this flexible, rich-features multi-ports VoIP to FXS
gateway. Please read this document carefully before install your gateway.
About this manual
This manual provider information about and introduction of installing, configuring and using
the gateway.
For interoperability with different IPPBX/Softswitch platform, you may refer to configure
guide with different system.
This manual is available in different configurations. It is written with reference to the default
configuration of the DAG1000-8S FXS VoIP Gateway.
Intended audience
This Manual is aimed primarily at Network and system engineers, who will install, configure
and maintain the gateway.
System engineers are persons who customize the system configuration to meet the
requirements of users.
Parts of document containing description of telephony features are aimed at users, who are
the persons who will actually use the gateway.
To Next Page
Loading...
