Dinstar FXS - Action URL

Dinstar FXS Voice Gateway User Manual
50
Primary NTP server port
Default is 123
Secondary NTP server
address
Default is 18.145.0.30
Secondary NTP server port
Default is 123
SYN Interval
Every certain time synchronization gateway time, the system
default every 3600 s synchronous once.
Time Zone
Time zone can be chosen. System default the United States central
time, Chicago.
Daylight Saving Time
Enable or disable daylight saving time
Daily Reboot
Enable the gateway to reboot daily
Reboot time
Reboot time in 24H format
WEB Port
Gateway web port, default is 80
Telnet port
Listening port of telnet service, default to 23
Access WEB by WAN
Enable or disable Access web service from WAN
Access WEB by LAN
Enable or disable Access web service from LAN
Access Telnet by WAN
Enable or disable telnet web service from WAN
Access Telnet by LAN
Enable or disable telnet web service from LAN
Action URL
Action URL can be used as a means to allow the VoIP platform learn about the IAD’s status. It
transmits data by GET request over the HTTP protocol. The IAD is HTTP client. At HTTP server
side, GET request must be processed, then cooperate with the VoIP platform. Thus, the
purpose is achieved.