Dinstar FXS - MAC Clone (Routing Mode)

Dinstar FXS Voice Gateway User Manual
23
Table 4.5-1VLAN parameter configuration
Data VLAN
Data 802.1Q VLAN ID(0-4095)
Fill out an ID to describe a data VLAN group, ID 0 used
to management VLAN, can’t use to service configure.
Data 802.1p Priority（0-7）
802.1 protocol to control network traffic priority,
Priority from 0-7.
Voice VALN
Voice 802.1Q VLAN ID(0-4095)
Fill out an ID to describe a voice VLAN group, ID 0 used
to management VLAN, can’t used to service configure.
Voice 802.1p Priority（0-7）
802.1 protocol to control network traffic priority,
Priority from 0-7.
IP address
Can use dynamic or static IP address
Voice VLAN DNS Server
Can use dynamic or static DNS server address
Management
VLAN
Management 802.1Q VLAN ID(0-
4095)
Fill out an ID to describe a data VLAN group, ID 0 used
to management VLAN, can’t used to service configure.
Management 802.1p Priority
（0-7）
802.1 protocol to control network traffic priority,
Priority from 0-7.
IP address
Can use dynamic or static IP address
Management VLAN DNS server
Can use dynamic or static DNS server address
【Note】：Restart the device to take configuration effect.
MAC Clone (Routing mode)
MAC Clone Interface