Dinstar FXS - System Parameter

Dinstar FXS Voice Gateway User Manual
48
Call Forward Unconditional
Activate
*72*+ phone number#, transfer the call from the phone
number
Call Forward Unconditional
Deactivate
*73#, forbid call forward unconditional
Call Forward Busy Activate
*90*+ forward busy number#
Call Forward Busy Deactivate
*91#, forbid call forward busy
Call Forward No Reply
Activate
*92*+ forward no reply number#
Call Forward No Reply
Deactivate
*93#, close this function
Do Not Disturb Activate
*78#, enable DND function
Do Not Disturb Deactivate
*79#, close DND function
Dial Voicemail
*200#, visit voice mail box
Note：* private services are open by default
System Parameter
System parameters include: STUN、NTP、Provision、WEB parameter、Telnet.
1）STUN：STUN（Simple Traversal of UDP over NATs）is a network protocol. It allows
users back of NAT find their own public network address, NAT type and internet end port
have been bound by NAT for a local port. Two back of NAT router devices established UDP
communication through this information.
STUN doesn’t support TCP connection and H.323.
2）NTP：Network Time Protocol（NTP）is a computer time synchronization protocol.
3）Provision：Auto Provisioning can be used to provide general and specific configuration
parameters ("Settings") to the GATEWAYs and to manage firmware actualization.
System parameter configuration interface as follow: