Dinstar FXS - Media Parameter

Dinstar FXS Voice Gateway User Manual
35
Send CID before
Ringing
After enable this configuration, The THE GATEWAY send caller to
phone set before ringing, otherwise the caller ID will display after
ringing.
Delay of sending CID
after Ringing
Definite delay timer of caller ID while it set to send caller ID after
ringing. Its Default value 500ms
CFNRy Timeout
Timeout for call forward No Answer
SLIC Setting
Set the unit impedance
Long Line Support
Enable Long Analog extension line
Media Parameter
Media parameter mainly include: RTP start port, DTMF parameter, Preferred Vocoder.
Configuration Interface as follow：
Media Parameter Configuration Interface