UC2000-VE/F/G GSM/CDMA/WCDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Co., Ltd.
17
phone, then you will hear ‘setting succeeds’, then the factory setting of the gateway will
be restored.
3.2.3 Restore default IP and password
Press RST button for about 3 seconds, then the device will be rebooted and the IP
address, username and password will be restored to factory default.
3.2.4 Restore factory setting
Press RST button for about 7 seconds, then gateway will be rebooted and restored to
factory setting.
3.3 LOCAL MAINTENANCE THROUGH CONSOLE PORT
To ensure easy maintenance, the device provides a standard RS232 console port,
which has a Baud rate of 115200bps. Users can log in the device to carry out
maintenance-related configurations through the console port.
Example: Log in device via Console Port
Step 1: Prepare a serial cable as follows (standard RS232, 115200bps);
Step 2: Connect the F port of the serial cable with the COM port of PC. If the PC
does not have a COM port, please use a USB-to-COM converting tool to
connect the serial cable with the PC.
Step 3: Connect the M port of the serial cable with the console port of the device.
Step 4: Conduct configurations on login software.
Herein we take the PuTTY sofeware as an example. Detailed configurations are as follows:
To Next Page
Loading...
